

Retention pulley - Nodus-NUB®40
The NUB Friction Ring is a spherical friction retention pulley for ropes up to 12 mm. The NUB Friction Ring can be used in many applications and on all types of rope. Material : High T° thermoplastic / PA66
Free-nub®, friction or retention pulley in hard anodised 7075 T6 aluminium alloy or technical polyamide, extremely strong and lightweight.
They can be used to retain heavy loads, reeving kits or to transport loads or branches.
For use with our textile connectors / see Freelock® or Loop/Manille product sheet.
MACHINERY DIRECTIVE 2006/42/EC
Material: Aluminium "Fortal T6" / Polyamide Tech
See features belowHigh-strength spherical friction retention pulley, specially designed for use when dismantling a shaft, as it is able to withstand high impact forces.
Can be used to replace pulleys.
+ Applications
Product Name | Breaking load | WXeight | Ø NUB | Ø Recommended rope |
---|---|---|---|---|
Diam. max | ||||
Kn | gr | mm | mm | |
Free-nub 40 | 47 | 26 | 40 | 12 |
Free-nub 60 | 350 | 134 | 56 | 16 |
Retention pulley - Nodus-NUB®40
The NUB Friction Ring is a spherical friction retention pulley for ropes up to 12 mm. The NUB Friction Ring can be used in many applications and on all types of rope. Material : High T° thermoplastic / PA66
Sling eye in Dyneema® | Slings-Hl®
Spliced slings in Dyneema®. Can be overbraided and adjusted to length. Optional friction ring available Materials: Dyneema® / UHMWPE
ContactLow Freering® rings are made from an alloy of high-strength and high-deformation materials, and can be used effectively as a replacement for pulleys. The circular, wide groove design and large central "eye" opening optimise the descent of loads with minimum friction from the retaining rope. MACHINERY DIRECTIVE 2006/42/EC
Adjustable false fork | Treering®-Adjust
The Treering®-Adjust dummy fork is an adjustable, self-locking mooring strap, it is retrievable from the ground. Length: 80 / 110 / 140 cm (other lengths on request) Complies with EN 795 B Ideal for working at heights and pruning, the dummy fork is easy to install and adjust. + USES Forestry, tree pruning, working at heights. Reserved for use by 2 people / minimum measured resistance 22KN Do not use this equipment as a means of lifting Materials: Dyneema® / HT polyester / Duralumin ring / Anodized
Dyneema® Mobile anchor - MTS® EN795-B
Personal protective equipment PPE category 3 against falls from a height. Removable anchorage device with lock EN 795: 2012 type B + TS16415: 2°13/B intended to move along a belaying support; For use by two persons only / minimum measured strength 22KN Do not use this equipment as a lifting device This product must not be used beyond its limits or in any situation other than that for which it is intended. + USES Removable locking anchorage device, EN 795: 2012 type B. intended to move along a belaying support. + STANDARDS This product complies with Regulation (EU) 2016/425 on personal protective equipment. Materials : Dyneema® / Aluminium Torqual T6
Adjustable false fork | Treerope®-Adjust
The Treerope-Adjust® anchor strap can be used as a dummy fork, anchor point or connecting elements for ropes with splices. Adjustable and self-locking Length: 180 cm and 240 cm Custom-made maximum length 600 cm. Complies with EN 795 B Ideal for working at heights and pruning, the strap is easy to install and adjust Accessory Option: MTS EN 795 textile shackle connector FRD rings made of hardened and anodized aluminum
ContactVersatile rope travel device. The CLUTCH™ CMC™ Harken Industrial™ is distinguished by its unparalleled versatility: efficient hoisting, smooth load movement, controlled descent, easy ascent, reliable locking... Materials: aluminum / stainless steel / composite
ContactAdjustable false fork | Treering®-Segment
The Treering-segment anchor strap can be used as a mobile anchor point that can be adjusted by segment® or choke system, as a deflection point or as a connecting element. Used as a false fork, it serves as a protection for the tree, placed either around the trunk or around the chosen branch. It is adjustable thanks to its segments every 6 cm (125) and 9 cm (250 / 500). Length: 125 /250 / 500 cm (other lengths on request) Complies with EN 795 B, reserved for use by 2 people / minimum measured resistance 22KN Ideal for working at heights and pruning, the Treering-segment webbing is easy to install and use. + USES Forestry/pruning, working at heights. Materials: Dyneema® / Duralumin / Hardened anodized
Self-tightening adjustable eye sling - Lock
Dyneema® endless sling with adjustable self-tightening eye and protective sheath. Ideal product to complement a Nodus NUB retention pulley Possibility to be made to measure. Materials : Dyneema® / UHMWPE
Dyneema anchoring sling EN795-B | LS®
Ls Hl, endless round sling with overjacket, core and sheath 100% Dyneema® SK 78 or SK 99 ®. Very high resistance to abrasion and cuts (no need for protective sleeves). Removable anchoring device compliant with standard EN795-B Materials : Dyneema® core / Dyneema® sheath
ContactShackle "High-strength" Dyneema® | Ms®Hl
Heavy-duty, high-strength Dyneema® textile shackle for connecting two straps, or even a strap and a winch cable. It can be used to connect cables and slings in hostile environments, or to tow heavy vehicles. MACHINERY DIRECTIVE 2006/42/EC Materials: Dyneema® / Aluminium T6
Contact