Nodus Factory is closed from the 3th until the 18th of August. Orders placed during this period will be shipped from the 19th on. Many thanks for your understanding. Best regards your Nodus Factory team.
Dyneema® Mobile anchor - MTS® EN795-B
Personal protective equipment PPE category 3 against falls from a height.
Removable anchorage device with lock EN 795: 2012 type B + TS16415: 2°13/B intended to move along a belaying support;
For use by two persons only / minimum measured strength 22KN
Do not use this equipment as a lifting device
This product must not be used beyond its limits or in any situation other than that for which it is intended.
+ USES
Removable locking anchorage device, EN 795: 2012 type B. intended to move along a belaying support.
+ STANDARDS
This product complies with Regulation (EU) 2016/425 on personal protective equipment.
Easy-shackle® (patented device) is a textile safety connector for fall protection nets.
This Dyneema® textile connector is designed for attaching vertical safety devices (nets) to scaffolding, to protect against falling objects, rubble or other tools.
MACHINES DIRECTIVE 2006/42/EC and Safety net EN 1263-1
Materials: Dyneema® / Polymers
The Treering-segment anchor strap can be used as a mobile anchor point that can be adjusted by segment® or choke system, as a deflection point or as a connecting element.
Used as a false fork, it serves as a protection for the tree, placed either around the trunk or around the chosen branch.
It is adjustable thanks to its segments every 6 cm (125) and 9 cm (250 / 500).
Length: 125 /250 / 500 cm (other lengths on request)
Complies with EN 795 B, reserved for use by 2 people / minimum measured resistance 22KN
Ideal for working at heights and pruning, the Treering-segment webbing is easy to install and use.
+ USES
Forestry/pruning, working at heights.
Materials: Dyneema® / Duralumin / Hardened anodized
The Harken Wingman uses new design and technology to get the most out of a compact personal mechanical advantage system. This pulley is designed to be used in a fall prevention system.
Wingman combines a ratchet pulley to stop the cable with a composite handle or wing that the operator can open and close under load for a well modulated release.
Materials: Aluminum / Stainless Steel / Composite
Dyneema® endless sling with adjustable self-tightening eye and protective sheath.
Ideal product to complement a Nodus NUB retention pulley
Possibility to be made to measure.
Materials : Dyneema® / UHMWPE
Low Freering® rings are made from an alloy of high-strength and high-deformation materials, and can be used effectively as a replacement for pulleys.
The circular, wide groove design and large central "eye" opening optimise the descent of loads with minimum friction from the retaining rope.
MACHINERY DIRECTIVE 2006/42/EC
This DyTech® textile rope for industry and lifting is available in different Ø and is made of a mixture of Dyneema® and Technora® which guarantees an excellent heat resistance.
Supplied in the desired length (Ex: x quantity = x meter)
Option : Splicing can be done in our workshop
Splicing
The Treering®-Adjust dummy fork is an adjustable, self-locking mooring strap, it is retrievable from the ground.
Length: 80 / 110 / 140 cm (other lengths on request)
Complies with EN 795 B
Ideal for working at heights and pruning, the dummy fork is easy to install and adjust.
+ USES
Forestry, tree pruning, working at heights.
Reserved for use by 2 people / minimum measured resistance 22KN
Do not use this equipment as a means of lifting
Materials: Dyneema® / HT polyester / Duralumin ring / Anodized
Free-nub®, friction or retention pulley in hard anodised 7075 T6 aluminium alloy or technical polyamide, extremely strong and lightweight.
They can be used to retain heavy loads, reeving kits or to transport loads or branches.
For use with our textile connectors / see Freelock® or Loop/Manille product sheet.
MACHINERY DIRECTIVE 2006/42/EC
Material: Aluminium "Fortal T6" / Polyamide Tech
Français 
English 
Italiano 
user manual:
