Ninja Footlocker - Harken
The Ninja Footlocker uses the body's major muscle group to make climbing easier and faster.
This makes it easier to progress up the rope without having to stretch it or bend over to manually slide it. The result is a significant increase in productivity.
Materials: Aluminum / Stainless steelSee features below
INTERNATIONAL DELIVERY -
Shipped within 48h
Credit Card - VISA - MasterCard - Paypal
+33 2 97 67 64 83 - 9 am to 5 pm
Rope climbing has never been easier! Lightweight and sturdy, the Ninja™ footlocker from Harken Industrial™ attaches to the boot. Attached to an aluminum bracket, the two cams holding the rope are made of stainless steel. The Ninja footlocker engages the body's major muscle group to make climbing easier and faster. It accepts ropes up to 13 mm in diameter and has a maximum working load of 1.5 kN. The Ninja foot hold is designed to optimize rope travel with reduced spring tension to reduce friction. This makes it easier to move forward on the rope without having to stretch the rope or bend over to manually slide it. The result is a significant increase in productivity.
- Max. rope diameter (mm) 13 mm
- Max. rated load (kN) 1.5 kN
- Minimum rope diameter (mm) 8 mm
- No more accidental rope ejection: The double cam system prevents the rope from being accidentally ejected. The rope stays in place until the user intentionally unhooks it. The Ninja is the first rope clamp that can be used on both feet.
- Rope Protection: The Ninja footlocker's cams have ribs, not aggressive spikes that can damage the rope.
- Innovative Design: The dual-cam system (inspired by the Cam-Matic® ball bearing wedges in the Harken rigging product line) applies pressure to both sides of the rope simultaneously. This provides greater holding power than devices that simply compress one side of the rope against the bracket.
|Product Name||Width||Weight||⌀ max rope||max. rated load||Height||⌀ minimum rope length|
- No more accidental ejection of the rope
- Protection of the rope
- Innovative design
13 other products in the same category:
Free-nub®, friction or retention pulley in hard anodised 7075 T6 aluminium alloy or technical polyamide, extremely strong and lightweight. They can be used to retain heavy loads, reeving kits or to transport loads or branches. For use with our textile connectors / see Freelock® or Loop/Manille product sheet. MACHINERY DIRECTIVE 2006/42/EC Material: Aluminium "Fortal T6" / Polyamide Tech
Dyneema® high strength textile carabiner with bypass ring and safety lock Materials: Dyneema® / UHMWPE / Aluminum
BF® , the Block-Friction® violin ring – has an exceptional weight/strength ratio (10 times lighter than a pulley), designed for a heavy static load. The Friction Blocks can be used to make vang or mainsail 3:1 or 4:1 hoists on dinghies, as well as Cunningham adjustment hoists, or clew hoists on larger vessels.
Personal protective equipment PPE category 3 against falls from a height. Removable anchorage device with lock EN 795: 2012 type B + TS16415: 2°13/B intended to move along a belaying support; For use by two persons only / minimum measured strength 22KN Do not use this equipment as a lifting device This product must not be used beyond its limits or in any situation other than that for which it is intended. + USES Removable locking anchorage device, EN 795: 2012 type B. intended to move along a belaying support. + STANDARDS This product complies with Regulation (EU) 2016/425 on personal protective equipment. Materials : Dyneema® / Aluminium Torqual T6
Heavy-duty, high-strength Dyneema® textile shackle for connecting two straps, or even a strap and a winch cable. It can be used to connect cables and slings in hostile environments, or to tow heavy vehicles. MACHINERY DIRECTIVE 2006/42/EC Materials: Dyneema® / Aluminium T6Contact
Low Freering® rings are made from an alloy of high-strength and high-deformation materials, and can be used effectively as a replacement for pulleys. The circular, wide groove design and large central "eye" opening optimise the descent of loads with minimum friction from the retaining rope. MACHINERY DIRECTIVE 2006/42/EC
The Harken Wingman uses new design and technology to get the most out of a compact personal mechanical advantage system. This pulley is designed to be used in a fall prevention system. Wingman combines a ratchet pulley to stop the cable with a composite handle or wing that the operator can open and close under load for a well modulated release. Materials: Aluminum / Stainless Steel / CompositeContact
Dyneema® endless sling with adjustable self-tightening eye and protective sheath. Ideal product to complement a Nodus NUB retention pulley Possibility to be made to measure. Materials : Dyneema® / UHMWPE
The NUB Friction Ring is a spherical friction retention pulley for ropes up to 12 mm. The NUB Friction Ring can be used in many applications and on all types of rope. Material : High T° thermoplastic / PA66