Nodus Factory is closed from the 3th until the 18th of August. Orders placed during this period will be shipped from the 19th on. Many thanks for your understanding. Best regards your Nodus Factory team.
Adjustable false fork | Treering® Adjust
40030
The Treering®-Adjust dummy fork is an adjustable, self-locking mooring strap, it is retrievable from the ground.
SECURE PAYMENT Credit Card - VISA - MasterCard - Paypal
CUSTOMER SERVICE +33 2 97 67 64 83 - 9 am to 5 pm
Description
The Treering-Adjust anchor strap allows you to create an anchor point that is easily attached as close as possible to the structure "Posts, chimneys, IPNs, trees,...“
Reserved for use by 2 people / minimum measured resistance 22KN
Do not use this equipment as a means of lifting
« Used as a false fork and serves as a protection for the tree, placed either around the trunk or around the chosen branch»
This product should not be used beyond its limits or in any situation other than that for which it is intended.
Rope recommended
Small ring FRD 14 – recommended rope 8mm/12mm – inner diameter 16mm
Large ring FRD 20 – recommended string 12mm/18mm – inner diameter 24mm
Data sheet
1- Dyneema® textile core® Ø 7 mm
12 braids – Stretched DSK78
2- Polyester PES® oversheath
3- Hardened anodized aluminum friction ring
Freering 14 & 20
Product Details
Advantages
Comfort of use
Weight/resistance ratio
Performance, lightness and reliability
Reliable and maintenance-free
How is it used?
Installation: pass the abseiling rope through the rings of the false fork, from the smaller ring to the larger of the two rings.
Adjusting the length: simply pull on the handle-shaped textile end.
Dismantling: pull the abseiling rope after removing the carabiner so that it comes out of the larger of the two low friction rings.
The Treerope-Adjust anchor strap allows you to create an anchor point that is easily attached as close as possible to the structure "Posts, chimneys, IPNs, trees,... etc“
Reserved for use by 2 people / minimum measured resistance 22KN
Do not use this equipment as a means of lifting
«Used as a false fork and serves as a protection for the tree, placed either around the trunk or around the chosen branch»
This product should not be used beyond its limits or in any situation other than that for which it is intended.
Complies with the Machinery Directive 2006/42/EC
The Mickey-ring 3D pivot anchor is a set composed of 3 connection points, ideal for efficiently making your 3D adjustments.
Lightweight and compact, the multiaxial friction 3D pulley allows perfect alignment of connections at different angles, each friction ring is steerable
Easy to set up, this 3D multiaxial pivot anchor system with a rotating friction ring up to 210° will produce minimal friction and wear on your ropes.
This product should not be used beyond its limits or in any situation other than that for which it is intended.
Complies with the Machinery Directive 2006/42/EC
Low Freering® rings are made from an alloy of high-strength and high-deformation materials, and can be used effectively as a replacement for pulleys.
The circular, wide groove design and large central "eye" opening optimise the descent of loads with minimum friction from the retaining rope.
MACHINERY DIRECTIVE 2006/42/EC
The Adjustable Textile-Sling® Ratchet Strap is a restraint strap designed to hold and secure goods or equipment. Using a ratchet tensioner, they are tightened and attached to create a secure and reliable attachment to the bracket.
Ratchet straps are commonly used as restraints in the following applications:
Pallets for transporting goods
Equipment crates or goods ready for transport
Boat tenders
This product complies with EN-12195-2
Materials: Dyneema® or Polyester
The MS® HL flexible shackle is a textile connector for connecting ends: cables, straps, pulleys, etc.
Easy to handle and resistant to heavy loads, it can easily replace steel shackles.
It's a technical, high-performance product for lifting, pulling and towing applications.
A multi-purpose textile connector for heavy loads, as strong as a steel shackle, but 10x lighter!
MACHINERY DIRECTIVE 2006/42/EC
Materials: Dyneema® / Aluminium Torqual T6
The Textile-Fuse® makes it possible to ensure the link between two elements and, in the event of exceeding the limits authorised or declared by the user or the "Man of the Art" installer, to reduce the tensions on the structure to which it is attached.
"Safety device for anchors and ropes" Patented FR2105794
Mode 1 :
For illuminations, the service limit breaking is calculated at 3 x the ultimate limit tension.
Mode 2 :
Concerns "Street Sky", shade veil, etc. The breaking tension is greater than the ultimate limit service.
The Ninja Footlocker uses the body's major muscle group to make climbing easier and faster.
This makes it easier to progress up the rope without having to stretch it or bend over to manually slide it. The result is a significant increase in productivity.
Materials: Aluminum / Stainless steel
The Harken Wingman uses new design and technology to get the most out of a compact personal mechanical advantage system. This pulley is designed to be used in a fall prevention system.
Wingman combines a ratchet pulley to stop the cable with a composite handle or wing that the operator can open and close under load for a well modulated release.
Materials: Aluminum / Stainless Steel / Composite
The Textile sling ® "spliced eye" Reinforced Stainless Steel Thimble
Very good resistance
Ideal as a replacement for steel cable.
Ideal for your material handling operations
Length and diameter on request
Can be overbraided and adjusted to length. Optional friction ring available
Complies with the Machinery Directive 2006/42/EC
Materials: Dyneema® / PES
BP® textile shackle in high-tenacity polyester, an ideal textile connector to replace steel shackles and carabiners.
Flexible, lightweight and highly resistant, the textile shackle will never open accidentally, even under heavy loads.
10 times lighter than a steel shackle, it's a good alternative to conventional metal shackles and carabiners.
MACHINE DIRECTIVE 2006/42/EC
The Prussik-loop lanyard is a self-locking loop pruning rope with a sewn-in loop.
It is ideal to be used as a brake when going down the rope.
This product meets the following safety standards:
EN 795-B
EN 354
The BFrD® violin pulley is a set of 2 low-friction rings mounted on a Dyneema® textile axle.
Functionality:
BFrD® violin pulley with 2 low-friction Duralumin rings on a Dyneema® textile axle.
Enables efficient 3D adjustment and perfect alignment of connections at different angles.
Adjustable, movable friction rings for great flexibility.
The Textile-Strap® L lever tensioner strap is a restraint strap designed to hold and secure goods or equipment. With the help of a lever, they are tightened and attached to create a secure and reliable attachment to the bracket.
Lever straps are commonly used as restraints in the following applications:
Pallets for transporting goods
Equipment crates or goods ready for transport
Boat tenders
Choose the lever strap that best suits your needs according to the T.M.U. of the elements to be secured, the length and the breakage of the strap.
This product complies with EN-12195-2
High-quality, pre-stretched Mylar® high-modulus polyester textile towing shackle for absorbing tensile energy.
The ideal connector for connecting two slings or towing straps, or for creating a new anchoring point.
High-strength, flexible and elastic multi-purpose connector that won't damage vehicles when towing.
MACHINE DIRECTIVE 2006/42/EC
Complementary product : NUB® idler pulley
IDLER PULLEY
The Freenub® pulley can be used as :
Hauling pulley and mobile anchor accessory
Waterfall hoist and deflection point
Connecting Element
Device stop end cap: Rope-Puck
Allows the passage of ropes without friction and without damaging them.
Textile connector accessory / see product sheet
Freelock®
MTS 10®
Complies with the Machinery Directive 2006/42/EC
Materials : Aluminum 7075 / PA66
The Treering-Segment false fork “anchor strap” allows you to create an anchor point that is easily attached as close as possible to the structure "Posts, chimneys, IPNs, trees,... etc“
Reserved for use by 2 people / minimum measured resistance 22KN
Do not use this equipment as a means of lifting
Used as a false fork, it serves as a protection for the tree, placed either around the trunk or around the chosen branch.
This product should not be used beyond its limits or in any situation other than that for which it is intended.
Complies with the Machinery Directive 2006/42/EC
Français 
English 
Español 
Deutsch 
Italiano 
