Personal protective equipment PPE category 3 against falls from a height. Removable anchorage device with lock EN 795: 2012 type B + TS16415: 2°13/B intended to move along a belaying support; For use by two persons only / minimum measured strength 22KN Do not use this equipment as a lifting device This product must not be used beyond its limits or in any situation other than that for which it is intended. USES Removable locking anchorage device, EN 795: 2012 type B. intended to move along a belaying support. Materials : Dyneema® / Aluminium Torqual T6
Triple Connections Swivel Anchor | Mickey-Ring® 3D
The Mickey-ring 3D pivot anchor is a set composed of 3 connection points, ideal for efficiently making your 3D adjustments.
Lightweight and compact, the multiaxial friction 3D pulley allows perfect alignment of connections at different angles, each friction ring is steerable
Easy to set up, this 3D multiaxial pivot anchor system with a rotating friction ring up to 210° will produce minimal friction and wear on your ropes.
This product should not be used beyond its limits or in any situation other than that for which it is intended.
Complies with the Machinery Directive 2006/42/ECSee features below
INTERNATIONAL DELIVERY -
Shipped within 48h
Credit Card - VISA - MasterCard - Paypal
+33 2 97 67 64 83 - 9 am to 5 pm
The Mickey-Ring® multiple anchor allows for large deflection angles without increasing friction, it has an exceptional weight-to-strength ratio (10 times lighter than a pulley), designed for high loads.
- Multiple Connections with Load Transfer
- Rescue operations
- 3D Adjustment
- Deflection point or connecting element
Fr Low Friction High Strength Aluminum Ring 7075
- Hard Anodizing Treatment
- Its elastic strength is of the order of 300 MPa, and its Young's modulus is 75 GPaSertissage entre anneaux par axe textile :
- Loop Dyneema DSK78 12 braid
Friction Rings Freering :
- FrD Colour dark grey anthracite, orange marking
- FrA Light grey colour, white markings
- Ease of use
- Weight-to-high strength ratio
- Performance, lightness and reliability
- The textile bond between the ring allows the load to self-align
16 other products in the same category:
Low Freering® rings are made from an alloy of high-strength and high-deformation materials, and can be used effectively as a replacement for pulleys. The circular, wide groove design and large central "eye" opening optimise the descent of loads with minimum friction from the retaining rope. MACHINERY DIRECTIVE 2006/42/EC
Ms® Cable-lift, is a Dyneema® lifting shackle, specially designed for lifting wire ropes, chairlifts, cable cars, railway cables, etc. etc. Advantageously replaces moving head shackles for unwiring ski lift pylons and for carrying out maintenance on their equipment. Textile shackles will be used for the interface at the ends of the lifting device: Fixed Point → Lifting Device Cable → Lifting Device Complies with the Machinery Directive 2006/42/EC
The Textile-Strap® L lever tensioner strap is a restraint strap designed to hold and secure goods or equipment. With the help of a lever, they are tightened and attached to create a secure and reliable attachment to the bracket. Lever straps are commonly used as restraints in the following applications: Pallets for transporting goods Equipment crates or goods ready for transport Boat tenders Choose the lever strap that best suits your needs according to the T.M.U. of the elements to be secured, the length and the breakage of the strap. This product complies with EN-12195-2
The Ninja Footlocker uses the body's major muscle group to make climbing easier and faster. This makes it easier to progress up the rope without having to stretch it or bend over to manually slide it. The result is a significant increase in productivity. Materials: Aluminum / Stainless steelContact
BF® , the Block-Friction® violin ring – has an exceptional weight/strength ratio (10 times lighter than a pulley), designed for a heavy static load. The Friction Blocks can be used to make vang or mainsail 3:1 or 4:1 hoists on dinghies, as well as Cunningham adjustment hoists, or clew hoists on larger vessels. Materials: Dyneema® / UHMWPE / Flexible TPE / Duralumin
The Adjustable Textile-Sling® Ratchet Strap is a restraint strap designed to hold and secure goods or equipment. Using a ratchet tensioner, they are tightened and attached to create a secure and reliable attachment to the bracket. Ratchet straps are commonly used as restraints in the following applications: Pallets for transporting goods Equipment crates or goods ready for transport Boat tenders This product complies with EN-12195-2 Materials: Dyneema® or Polyester
The Freenub® pulley can be used as : Hauling pulley and mobile anchor accessory Waterfall hoist and deflection point Connecting Element Device stop end cap: Rope-Puck Allows the passage of ropes without friction and without damaging them. Textile connector accessory / see product sheet Freelock® MTS 10® Complies with the Machinery Directive 2006/42/EC Materials : Aluminum 7075 / PA66
Easy-shackle® (patented device) is a textile safety connector for fall protection nets. This Dyneema® textile connector is designed for attaching vertical safety devices (nets) to scaffolding, to protect against falling objects, rubble or other tools. MACHINES DIRECTIVE 2006/42/EC and Safety net EN 1263-1 Materials: Dyneema® / Polymers
Sling-loop® Bi-material Dyneema sk 99 reference D/D is a static endless round sling for industrial or extreme use, such as forestry. Its design combines two high-performance fibres with a polymerising induction, giving it excellent strength and low elongation. This product must not be used beyond its limits or in any situation other than that for which it is intended. Very high abrasion and cut resistance (no need for protective sleeves) Complies with Machinery Directive 2006/42/EC Materials: Core in Dyneema® SK 99 / protective sheath in Dyneema® SK 78.
The Textile-Blocker Adjust anchoring sling allows you to create an adjustable anchoring point that is easy to fix and adjust. For use by 2 people only / minimum measured strength 22KN Do not use this equipment as a means of lifting This product must not be stressed beyond its limits or in any situation other than that for which it is intended. Complies with the Machinery Directive 2006/42/EC
The MS® HL flexible shackle is a textile connector for connecting ends: cables, straps, pulleys, etc. Easy to handle and resistant to heavy loads, it can easily replace steel shackles. It's a technical, high-performance product for lifting, pulling and towing applications. A multi-purpose textile connector for heavy loads, as strong as a steel shackle, but 10x lighter! MACHINERY DIRECTIVE 2006/42/EC Materials: Dyneema® / Aluminium Torqual T6
The Prussik-loop lanyard is a self-locking loop pruning rope with a sewn-in loop. It is ideal to be used as a brake when going down the rope. This product meets the following safety standards: EN 795-B EN 354
The Treering®-Adjust dummy fork is an adjustable, self-locking mooring strap, it is retrievable from the ground. Length: 80 / 110 / 140 cm ( other lengths on request ) This product meets the following safety standards: EN 795-BEN 354 Complies with the Machinery Directive 2006/42/EC Ideal for working at heights and pruning, the dummy fork is easy to install and adjust. USES Forestry, tree pruning, working at heights. Reserved for use by 2 people / minimum measured resistance 22KN Do not use this equipment as a means of lifting Materials: Dyneema® / HT polyester / Duralumin ring / Anodized