The Dytech® rope is a textile cable intended for industrial or extreme use such as forestry, its design by a blend of two high-performance fibers allows it to provide excellent resistance to friction and heat. Bi-material Dyneema® and Technora® cables « A rope originally designed by Nodus Factory for military applications, for use on furlers and winches. » Accessories: endless sling, textile shackle, Freering, Freenub, Freehook, etc. Option: Splicing can be done in our workshops This product should not be used beyond its limits or in any situation other than that for which it is intended.
Self-locking knot | Prussik-loop®
The Prussik-loop lanyard is a self-locking loop pruning rope with a sewn-in loop.
It is ideal to be used as a brake when going down the rope.
This product meets the following safety standards:
- EN 795-B
- EN 354
INTERNATIONAL DELIVERY -
Shipped within 48h
Credit Card - VISA - MasterCard - Paypal
+33 2 97 67 64 83 - 9 am to 5 pm
The Prussik-loop lanyard is a rope with sewn splice, it is ideal to be used as a brake when descending on a rope.
Made of "Technora®" or aramid with the following properties:
- Thermal resistance of +/- 500°C
- High chemical resistance
- Insensitive to the actions of water
- Resistant to organic solvents and acids
The Prussik-loop consists of:
- A loop (endless rope) braided in aramid, a fiber known to withstand high temperatures and to display good mechanical properties.
- A protective PES sheath.
- A spliced and sewn loop overmolded in PE.
This product should not be used beyond its limits or in any situation other than that for which it is intended.
- Technora® or aramide® braided rope Ø 6,5 mm
- Sheath PES® 48 Fx
- PE sheathed spliced eye
- Length of 45 cm and 50 cm
Technora® or aramide® braided rope
- High tensile strength
- Lightweight and strong (8 times stronger than steel)
- Good fatigue resistance
- Good resistance to T°
- Dimensional Stability
Breaking strength of 34 kN
Ease of use and self-locking knot
- Performance, lightness and reliability
- Textile flexibility and protective sheath
- Weight-to-high strength ratio
- Flexibility of the textile connector
16 other products in the same category:
Ms® Cable-lift, is a Dyneema® lifting shackle, specially designed for lifting wire ropes, chairlifts, cable cars, railway cables, etc. etc. Advantageously replaces moving head shackles for unwiring ski lift pylons and for carrying out maintenance on their equipment. Textile shackles will be used for the interface at the ends of the lifting device: Fixed Point → Lifting Device Cable → Lifting Device Complies with the Machinery Directive 2006/42/EC
The Treering-Segment false fork “anchor strap” allows you to create an anchor point that is easily attached as close as possible to the structure "Posts, chimneys, IPNs, trees,... etc“ Reserved for use by 2 people / minimum measured resistance 22KN Do not use this equipment as a means of lifting Used as a false fork, it serves as a protection for the tree, placed either around the trunk or around the chosen branch. This product should not be used beyond its limits or in any situation other than that for which it is intended. Complies with the Machinery Directive 2006/42/EC
The Ninja Footlocker uses the body's major muscle group to make climbing easier and faster. This makes it easier to progress up the rope without having to stretch it or bend over to manually slide it. The result is a significant increase in productivity. Materials: Aluminum / Stainless steelContact
The Freenub® pulley can be used as : Hauling pulley and mobile anchor accessory Waterfall hoist and deflection point Connecting Element Device stop end cap: Rope-Puck Allows the passage of ropes without friction and without damaging them. Textile connector accessory / see product sheet Freelock® MTS 10® Complies with the Machinery Directive 2006/42/EC Materials : Aluminum 7075 / PA66
The Textile-Strap® L lever tensioner strap is a restraint strap designed to hold and secure goods or equipment. With the help of a lever, they are tightened and attached to create a secure and reliable attachment to the bracket. Lever straps are commonly used as restraints in the following applications: Pallets for transporting goods Equipment crates or goods ready for transport Boat tenders Choose the lever strap that best suits your needs according to the T.M.U. of the elements to be secured, the length and the breakage of the strap. This product complies with EN-12195-2
The Mickey-ring 3D pivot anchor is a set composed of 3 connection points, ideal for efficiently making your 3D adjustments. Lightweight and compact, the multiaxial friction 3D pulley allows perfect alignment of connections at different angles, each friction ring is steerable Easy to set up, this 3D multiaxial pivot anchor system with a rotating friction ring up to 210° will produce minimal friction and wear on your ropes. This product should not be used beyond its limits or in any situation other than that for which it is intended. Complies with the Machinery Directive 2006/42/EC
Personal protective equipment PPE category 3 against falls from a height. Removable anchorage device with lock EN 795: 2012 type B + TS16415: 2°13/B intended to move along a belaying support; For use by two persons only / minimum measured strength 22KN Do not use this equipment as a lifting device This product must not be used beyond its limits or in any situation other than that for which it is intended. USES Removable locking anchorage device, EN 795: 2012 type B. intended to move along a belaying support. Materials : Dyneema® / Aluminium Torqual T6
High-quality, pre-stretched Mylar® high-modulus polyester textile towing shackle for absorbing tensile energy. The ideal connector for connecting two slings or towing straps, or for creating a new anchoring point. High-strength, flexible and elastic multi-purpose connector that won't damage vehicles when towing. MACHINE DIRECTIVE 2006/42/EC Complementary product : NUB® idler pulley IDLER PULLEYContact
Easy-shackle® (patented device) is a textile safety connector for fall protection nets. This Dyneema® textile connector is designed for attaching vertical safety devices (nets) to scaffolding, to protect against falling objects, rubble or other tools. MACHINES DIRECTIVE 2006/42/EC and Safety net EN 1263-1 Materials: Dyneema® / Polymers
Friction opening pulleys for hauling or occasional returns. Allows control and return of ropes even under tension Allows the pulley to be positioned anywhere along the rope Ideal for quickly creating a hoist for crevasse rescues Gear reduction with a pulley reduces the weight of the fallen person by half, so that a strong partner can pull the victim up on their own. Complies with the Machinery Directive 2006/42/EC Materials: Dyneema® / Aluminum
Low Freering® rings are made from an alloy of high-strength and high-deformation materials, and can be used effectively as a replacement for pulleys. The circular, wide groove design and large central "eye" opening optimise the descent of loads with minimum friction from the retaining rope. MACHINERY DIRECTIVE 2006/42/EC
The MS® HL flexible shackle is a textile connector for connecting ends: cables, straps, pulleys, etc. Easy to handle and resistant to heavy loads, it can easily replace steel shackles. It's a technical, high-performance product for lifting, pulling and towing applications. A multi-purpose textile connector for heavy loads, as strong as a steel shackle, but 10x lighter! MACHINERY DIRECTIVE 2006/42/EC Materials: Dyneema® / Aluminium Torqual T6
The Textile sling ® "spliced eye" Reinforced Stainless Steel Thimble Very good resistance Ideal as a replacement for steel cable. Ideal for your material handling operations Length and diameter on request Can be overbraided and adjusted to length. Optional friction ring available Complies with the Machinery Directive 2006/42/EC Materials: Dyneema® / PESContact
BF® , the Block-Friction® violin ring – has an exceptional weight/strength ratio (10 times lighter than a pulley), designed for a heavy static load. The Friction Blocks can be used to make vang or mainsail 3:1 or 4:1 hoists on dinghies, as well as Cunningham adjustment hoists, or clew hoists on larger vessels. Materials: Dyneema® / UHMWPE / Flexible TPE / Duralumin