Nodus Factory is closed from the 3th until the 18th of August. Orders placed during this period will be shipped from the 19th on. Many thanks for your understanding. Best regards your Nodus Factory team.
Adjustable false fork | Treerope®-Adjust
40042
The Treerope-Adjust anchor strap allows you to create an anchor point that is easily attached as close as possible to the structure "Posts, chimneys, IPNs, trees,... etc“
Reserved for use by 2 people / minimum measured resistance 22KN
Do not use this equipment as a means of lifting
«Used as a false fork and serves as a protection for the tree, placed either around the trunk or around the chosen branch»
This product should not be used beyond its limits or in any situation other than that for which it is intended.
The Treering®-Adjust dummy fork is an adjustable, self-locking mooring strap, it is retrievable from the ground.
Length: 80 / 110 / 140 cm ( other lengths on request )
This product meets the following safety standards:
EN 795-BEN 354
Complies with the Machinery Directive 2006/42/EC
Ideal for working at heights and pruning, the dummy fork is easy to install and adjust.
USES
Forestry, tree pruning, working at heights.
Reserved for use by 2 people / minimum measured resistance 22KN
Do not use this equipment as a means of lifting
Materials: Dyneema® / HT polyester / Duralumin ring / Anodized
The Textile sling ® "spliced eye" Reinforced Stainless Steel Thimble
Very good resistance
Ideal as a replacement for steel cable.
Ideal for your material handling operations
Length and diameter on request
Can be overbraided and adjusted to length. Optional friction ring available
Complies with the Machinery Directive 2006/42/EC
Materials: Dyneema® / PES
BP® textile shackle in high-tenacity polyester, an ideal textile connector to replace steel shackles and carabiners.
Flexible, lightweight and highly resistant, the textile shackle will never open accidentally, even under heavy loads.
10 times lighter than a steel shackle, it's a good alternative to conventional metal shackles and carabiners.
MACHINE DIRECTIVE 2006/42/EC
Personal protective equipment PPE category 3 against falls from a height.
Removable anchorage device with lock EN 795: 2012 type B + TS16415: 2°13/B intended to move along a belaying support;
For use by two persons only / minimum measured strength 22KN
Do not use this equipment as a lifting device
This product must not be used beyond its limits or in any situation other than that for which it is intended.
USES
Removable locking anchorage device, EN 795: 2012 type B. intended to move along a belaying support.
Materials : Dyneema® / Aluminium Torqual T6
Low Freering® rings are made from an alloy of high-strength and high-deformation materials, and can be used effectively as a replacement for pulleys.
The circular, wide groove design and large central "eye" opening optimise the descent of loads with minimum friction from the retaining rope.
MACHINERY DIRECTIVE 2006/42/EC
The Dytech® rope is a textile cable intended for industrial or extreme use such as forestry, its design by a blend of two high-performance fibers allows it to provide excellent resistance to friction and heat.
Bi-material Dyneema® and Technora® cables
« A rope originally designed by Nodus Factory for military applications, for use on furlers and winches. »
Accessories: endless sling, textile shackle, Freering, Freenub, Freehook, etc.
Option: Splicing can be done in our workshops
This product should not be used beyond its limits or in any situation other than that for which it is intended.
The Adjustable Textile-Sling® Ratchet Strap is a restraint strap designed to hold and secure goods or equipment. Using a ratchet tensioner, they are tightened and attached to create a secure and reliable attachment to the bracket.
Ratchet straps are commonly used as restraints in the following applications:
Pallets for transporting goods
Equipment crates or goods ready for transport
Boat tenders
This product complies with EN-12195-2
Materials: Dyneema® or Polyester
The Textile-Strap® L lever tensioner strap is a restraint strap designed to hold and secure goods or equipment. With the help of a lever, they are tightened and attached to create a secure and reliable attachment to the bracket.
Lever straps are commonly used as restraints in the following applications:
Pallets for transporting goods
Equipment crates or goods ready for transport
Boat tenders
Choose the lever strap that best suits your needs according to the T.M.U. of the elements to be secured, the length and the breakage of the strap.
This product complies with EN-12195-2
Freelock® , a Dyneema® textile connector with an adjustable, self-tightening constrictor eye designed to attach low-friction pulleys quickly and securely without rigging.
For quick fitting of accessories:
Freering® low-friction rings
Freenub® pulley
This adjustable-eye sling is a Dyneema® textile connector with a "self-tightening sock" type sheath.
Complies with the Machinery Directive 2006/42/EC
Materials: Dyneema® / Dyneema® Oversheath
The Textile-Fuse® makes it possible to ensure the link between two elements and, in the event of exceeding the limits authorised or declared by the user or the "Man of the Art" installer, to reduce the tensions on the structure to which it is attached.
"Safety device for anchors and ropes" Patented FR2105794
Mode 1 :
For illuminations, the service limit breaking is calculated at 3 x the ultimate limit tension.
Mode 2 :
Concerns "Street Sky", shade veil, etc. The breaking tension is greater than the ultimate limit service.
The Mickey-ring 3D pivot anchor is a set composed of 3 connection points, ideal for efficiently making your 3D adjustments.
Lightweight and compact, the multiaxial friction 3D pulley allows perfect alignment of connections at different angles, each friction ring is steerable
Easy to set up, this 3D multiaxial pivot anchor system with a rotating friction ring up to 210° will produce minimal friction and wear on your ropes.
This product should not be used beyond its limits or in any situation other than that for which it is intended.
Complies with the Machinery Directive 2006/42/EC
The Prussik-loop lanyard is a self-locking loop pruning rope with a sewn-in loop.
It is ideal to be used as a brake when going down the rope.
This product meets the following safety standards:
EN 795-B
EN 354
Friction opening pulleys for hauling or occasional returns.
Allows control and return of ropes even under tension
Allows the pulley to be positioned anywhere along the rope
Ideal for quickly creating a hoist for crevasse rescues
Gear reduction with a pulley reduces the weight of the fallen person by half, so that a strong partner can pull the victim up on their own.
Complies with the Machinery Directive 2006/42/EC
Materials: Dyneema® / Aluminum
The Harken Wingman uses new design and technology to get the most out of a compact personal mechanical advantage system. This pulley is designed to be used in a fall prevention system.
Wingman combines a ratchet pulley to stop the cable with a composite handle or wing that the operator can open and close under load for a well modulated release.
Materials: Aluminum / Stainless Steel / Composite
Sling-loop® Bi-material Dyneema sk 99 reference D/D is a static endless round sling for industrial or extreme use, such as forestry.
Its design combines two high-performance fibres with a polymerising induction, giving it excellent strength and low elongation.
This product must not be used beyond its limits or in any situation other than that for which it is intended.
Very high abrasion and cut resistance (no need for protective sleeves)
Complies with Machinery Directive 2006/42/EC
Materials: Core in Dyneema® SK 99 / protective sheath in Dyneema® SK 78.