Sling-loop® Bi-material Dyneema sk 99 reference D/D is a static endless round sling for industrial or extreme use, such as forestry. Its design combines two high-performance fibres with a polymerising induction, giving it excellent strength and low elongation. This product must not be used beyond its limits or in any situation other than that for which it is intended. Very high abrasion and cut resistance (no need for protective sleeves) Complies with Machinery Directive 2006/42/EC Materials: Core in Dyneema® SK 99 / protective sheath in Dyneema® SK 78.
Friction ring | Freering®
Low Freering® rings are made from an alloy of high-strength and high-deformation materials, and can be used effectively as a replacement for pulleys.
The circular, wide groove design and large central "eye" opening optimise the descent of loads with minimum friction from the retaining rope.
MACHINERY DIRECTIVE 2006/42/ECSee features below
INTERNATIONAL DELIVERY -
Shipped within 48h
Credit Card - VISA - MasterCard - Paypal
+33 2 97 67 64 83 - 9 am to 5 pm
Freering®, a low-friction "sheave-less" pulley or retention block made of hardened anodised aluminium alloy, extremely strong and light, they allow ropes to pass through without friction and without damaging them.
They are ideal for use with our Freelock® device, a textile sling with two adjustable, self-tightening eyes.
- Lifting industry, forestry / pruning, construction, towing
- For all types of rope
- FrA ¬ Duralumin technical ¬ grey
- High mechanical resistance
- Low coefficient of friction
- Weight/resistance ratio
- Performance, lightness and reliability
11 other products in the same category:
The Harken Wingman uses new design and technology to get the most out of a compact personal mechanical advantage system. This pulley is designed to be used in a fall prevention system. Wingman combines a ratchet pulley to stop the cable with a composite handle or wing that the operator can open and close under load for a well modulated release. Materials: Aluminum / Stainless Steel / CompositeContact
Freelock® , a Dyneema® textile connector with an adjustable, self-tightening constrictor eye designed to attach low-friction pulleys quickly and securely without rigging. For quick fitting of accessories: Freering® low-friction rings Freenub® pulley This adjustable-eye sling is a Dyneema® textile connector with a "self-tightening sock" type sheath. Complies with the Machinery Directive 2006/42/EC Materials: Dyneema® / Dyneema® Oversheath
The Prussik-loop lanyard is a self-locking loop pruning rope with a sewn-in loop. It is ideal to be used as a brake when going down the rope. This product meets the following safety standards: EN 795-B EN 354
Personal protective equipment PPE category 3 against falls from a height. Removable anchorage device with lock EN 795: 2012 type B + TS16415: 2°13/B intended to move along a belaying support; For use by two persons only / minimum measured strength 22KN Do not use this equipment as a lifting device This product must not be used beyond its limits or in any situation other than that for which it is intended. USES Removable locking anchorage device, EN 795: 2012 type B. intended to move along a belaying support. Materials : Dyneema® / Aluminium Torqual T6
The Freenub® pulley can be used as : Hauling pulley and mobile anchor accessory Waterfall hoist and deflection point Connecting Element Device stop end cap: Rope-Puck Allows the passage of ropes without friction and without damaging them. Textile connector accessory / see product sheet Freelock® MTS 10® Complies with the Machinery Directive 2006/42/EC Materials : Aluminum 7075 / PA66
The Mickey-ring 3D pivot anchor is a set composed of 3 connection points, ideal for efficiently making your 3D adjustments. Lightweight and compact, the multiaxial friction 3D pulley allows perfect alignment of connections at different angles, each friction ring is steerable Easy to set up, this 3D multiaxial pivot anchor system with a rotating friction ring up to 210° will produce minimal friction and wear on your ropes. This product should not be used beyond its limits or in any situation other than that for which it is intended. Complies with the Machinery Directive 2006/42/EC
BF® , the Block-Friction® violin ring – has an exceptional weight/strength ratio (10 times lighter than a pulley), designed for a heavy static load. The Friction Blocks can be used to make vang or mainsail 3:1 or 4:1 hoists on dinghies, as well as Cunningham adjustment hoists, or clew hoists on larger vessels. Materials: Dyneema® / UHMWPE / Flexible TPE / Duralumin
The Ninja Footlocker uses the body's major muscle group to make climbing easier and faster. This makes it easier to progress up the rope without having to stretch it or bend over to manually slide it. The result is a significant increase in productivity. Materials: Aluminum / Stainless steelContact
Friction opening pulleys for hauling or occasional returns. Allows control and return of ropes even under tension Allows the pulley to be positioned anywhere along the rope Ideal for quickly creating a hoist for crevasse rescues Gear reduction with a pulley reduces the weight of the fallen person by half, so that a strong partner can pull the victim up on their own. Complies with the Machinery Directive 2006/42/EC Materials: Dyneema® / Aluminum